This is an old revision of the document!
Table of Contents
Related to the HybriDrive accessory power system (APS)
- Different module but same module tray?
- A123 ANR26650M1A High Power 26650 LiFePO4 Modules - Reconditioned 80%+
- Acquired module + 1 spare module tray
- These guys also have some
Cell summary
2.3 Ah, 3.3 V
Standard charge: 3A, 3.6V CCCV (45 min)
1.3C
Fast charge: 10A, 3.6V CCCV (15 min)
4.3C
CV charge voltage: 3.65 Volts (100%)
CV charge voltage: 3.5 Volts (95%)
Overcharge: 4.2 V absolute max
Discharge: 10C okay
23 A => 7.6 W / cell
Max cont discharge: 70 A => 231 W / cell
Max 10 s discharge: 120 A
10C discharge cell life => 180 A max
hmm wait thats higher than max current
Pack summary
A123 ANR26650M1A Module
12S8P => 18.4Ah
Module
HybriDrive
Original BMS
COTS BMS
Needs to support 12S8P
- “12s LiFe charger”
Have orignal BMS from batteries but may be too broken (many say DEAD) or proprietary to be useful. COTS MCU? X-ray PCBs?
- hyperion 1420i
- DK: (discontinued, but really good)
- 14s max
- none on ebay
icharger 4010duo
Turnigy Reaktor 1000W 30A 1-10S Lipo Battery Balance Charger RC LiFe NiMh NiCd
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
