Table of Contents

PCB

Above: LCD screen got a pinprick that allowed mold to grow?

Case front:

naNo
PUPPY

Case back:

Mfg. by
Ying Leung
Intl. Ltd

No.40080
(C) 1997
Playmates Toys

LCD

Dot matrix

Text on screen:

DTL 16116

Map @ mit2x

If you use standard brightfield techniques the screen really isn't visible. Usually a voltage is applied to rotate the light and the screen relies on polarizers to make the image dark. Theoretically I could excite the screen and at least see the pixels and considered a few ways to do that. To get the above image I used crossed polarizers and a bright light with the LCD on top of a white surface. The LCD screen is much larger than a normal die so I used my largest usable objective (2x) which has a field of view on the order of 5 mm.

A better setup would be to cross polarizers and shoot through it to a camera. This was just what I had lying around and it was small enough to fit on my microscope stage.

Possibly HDM16116H-2

  • Looks to be wrong footprint
  • Suggests to use with HD44780

Maybe CRYSTALONICS CDM16116?

Die

Map @ mit20x

  • Single (11786×12414, 49 MB)
 
digshadow/playmates_toys/nano_puppy_40080.txt · Last modified: 2015/04/17 11:11 by mcmaster
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki