, , , , , ,

SPI serial SRAM chip. Looks like 4 metal layers and a fairly fine process geometry.

Definitely not one of Microchip's standard fab processes. CMP filler pattern is consistent with UMC 180 nm (pitch and dimensions of CMP filler and traces on both M4 and M3 match xc2c32a within 3%) however this is the only evidence we have to support this conclusion at this time; tag is tentative.

The die ID also does not match the normal Microchip layout and there is no Microchip logo on the die. Maybe this mask set was acquired from a buyout or something?

There are three unbonded pads on the die. Purpose of these is unknown at this time since all known packages are 8 pins.

Package

8-pin SOIC.

Markings:

  23K256I
  SN (e3) 1002
  (Microchip logo) ADJ
  

Die

Size is approximately 2110 x 1120 μm (2.36 mm2)

Die copyright area. Markings:

  M4-B
  (C) (M) 2006
  E1090-A
  

Top left of SRAM array

Middle of SRAM array

Random logic, with focus on M4 and on M3