Differences

This shows you the differences between two versions of the page.

--- piranha_solution [2013/11/17 06:56] – created mcmaster
+++ piranha_solution [2013/11/17 07:08] – [Compatibility] mcmaster
@@ Line 7: / Line 7: @@
 Since its typical use is to remove organics, don't expect many organic things to survive.  Sources always say to avoid plasitcs, unclear how fluorinated plastics do
+"Piranha is compatible with teflon and borosilicate glass" [AMC]
 Metals?
+AZ etch rates from etch bible:
+  * "Evaporated Al in piranha etches at >5200 nm/min"
+  * "evaporated Cu at 88nm/min"
+  * "spin-on polyimide >17,000 nm/min"
+  * "Oxygen plasma eats polyimide at 370nm/min and is "slow or zero" for Cu/Al"
+"The Piranha (also known as sulfuric-peroxide)
+parts 96% H SO :1 part 30% H O .
+used here is a mix of
+. The hydrogen peroxide is added just before use.
+It is used as a cleaning solution that strips organics and some
+metals. In these tests, it was indeed found to etch photoresist,
+the resist pen, and polyimide very rapidly, but only slowly
+attacked the Parylene C. It also etched aluminum, nickel, and
+silver rapidly. Chromium was etched slowly, which allows it to
+be used for the cleaning of photomasks."
+====== References ======
+Acid comaptible materials (AMC): http://www.cheresources.com/invision/topic/19132-piranha-caros-acid-peroxymonosulfuric-acid-compatible-materials/