This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| equipment:x-ray [2015/07/19 06:45] – mcmaster | equipment:x-ray [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | Useful for finding die position in packages, looking into epoxied modules, etc | ||
| - | [[x-ray_image_intensifier]] | ||
| - | |||
| - | [[: | ||
| - | |||
| - | [[: | ||
| - | |||
| - | ====== Intensifying screens ====== | ||
| - | |||
| - | Introduction to screens ([[http:// | ||
| - | |||
| - | * standard | ||
| - | * slow | ||
| - | * calcium tungstate | ||
| - | * rare earth | ||
| - | * fast | ||
| - | * gadolinium or lanthanum | ||
| - | * Commercial brands: Kodak Lanex | ||
| - | |||
| - | There' | ||
| - | |||
| - | I think the number following the name is generally the gain. That is a 400 screen will put out twice as much light per x-ray as a 200 screen | ||
| - | |||
| - | Brands: | ||
| - | |||
| - | * 3M | ||
| - | * AGFA | ||
| - | * DUPONT/ | ||
| - | * FUJI | ||
| - | * JPI | ||
| - | * KIRAN | ||
| - | * KODAK | ||
| - | * Lanex: rare earth green | ||
| - | * KONICA | ||
| - | * MCI OPTONIX | ||
| - | |||
| - | Following sections are for screens I own. Basically they were cheap on eBay | ||
| - | |||
| - | ^Image ^Vendor ^Product ^Phosphor ^Speed ^Size ^kV sensitivity ^Labels ^Notes | | ||
| - | |{{: | ||
| - | |{{: | ||
| - | |{{: | ||
| - | |||
| - | ====== Intensifying tube ====== | ||
| - | |||
| - | was offered a broken tube but I don't think it would have been useful | ||
| - | |||
| - | |||
| - | ====== DIY x-ray setups ====== | ||
| - | |||
| - | Ben K x-ray, CBCT " | ||
| - | * originally unshielded but I think is now? | ||
| - | * In CBCT mode runs automatically via arduino and thus person doesn' | ||
| - | |||
| - | Russian fellow: http:// | ||
| - | * ...who gave himself acute radiation sickness. | ||
| - | |||
| - | John M dental x-ray setup | ||
| - | * which has about 100 lbs of lead shielding | ||
| - | * also operated remotely via ssh to laptop | ||
| - | |||
| - | |||
| - | ===== Rotary stage replacement ===== | ||
| - | |||
| - | Goal: stop using my Sherline rotary stage and instead use spare CNC rotary stage (from laser machine purchase lot) | ||
| - | |||
| - | Motor: Vexta PH566-B 5 phase stepper | ||
| - | |||
| - | Controller: Rorze RD-053MS | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * Has a lot of pins labeled | ||
| - | * Enclosed in box with cable running to the rotary table | ||
| - | * 3 per box | ||
| - | * Need to interface to output Centronix connector | ||
| - | |||
| - | The left side connections are pretty obvious: | ||
| - | * power | ||
| - | * 18V to 40VDC | ||
| - | * motor phases | ||
| - | |||
| - | Left side less so | ||
| - | * diff1 | ||
| - | * diff2 | ||
| - | * 4P IN | ||
| - | * FREE | ||
| - | * PHASE OUT | ||
| - | * ALARM OUT | ||
| - | |||
| - | Summary | ||
| - | * Up to 400 microsteps/ | ||
| - | * Current driven...looks like approx. 3.8mA at 5VDC? | ||
| - | * 3.3V compatible? | ||
| - | |||
| - | Two ways that step/ | ||
| - | |||
| - | Two Clock Input (2CK) (Inputs two clock pulses - CW clock pulse and CCW clock pulse) | ||
| - | * CW+/-: Motor rotates in CW direction with a pulse current of 8 to 20mA from CW+ to CW- terminal. | ||
| - | * CCW+/-: Motor rotates in CCW direction with a pulse current of 8 to 20mA from CCW+ to CCW- terminal. | ||
| - | |||
| - | One Clock Input (1CK) (Inputs clock pulse and direction (CW, CCW)) | ||
| - | * CLK+/-: Motor rotates in CW direction with a pulse current of 8 to 20mA from CLK+ to CLK- terminal and UD input off. | ||
| - | * UD+/-: Motor rotates in CCW direction with a pulse current of 8 to 20mA from CLK+ to CLK- terminal and UD input turned ON. | ||
| - | |||
| - | Basically it looks like second is standard step/ | ||
| - | * Yep buried in later documentation: | ||
| - | |||
| - | 6-2 Full Step Input (4P IN +/-): Motor rotates in full step mode with a pulse current of 2 to 10mA (approx. 3.8mA at 5VDC) from “4P IN +” to “4P IN –” | ||
| - | |||
| - | 6-3 Free Input (FREE +/-): The excitation current of motor will become 0 and a motor can be rotated by hand with a pulse | ||
| - | current of 2 to 10mA (approx. 3.8mA at 5VDC) from “FREE+” to “FREE-”. | ||
| - | * NOTE: Do not turn this input ON when motor is running at high speed, this operation would | ||
| - | damage the amplifier circuits. | ||
| - | |||
| - | 6-4 Phase Output (PHASE OUT+/-): PHASE OUT output (open collector output) is turned ON at the phase home. One pulse is put out every time the motor moves 7.2゚ in case of 0.72゚ motor. The Duty of output ON is 10%. | ||
| - | |||
| - | 6-5 Alarm Output (ALARM OUT+/-): Overheating protection circuit intervenes turning ALARM output ON. (Open collector output ON) | ||
| - | |||
| - | X channe | ||