Silicon Prawn

User Tools

Site Tools

Trace: • microscope • rie
microscope:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
microscope:start [2018/01/24 18:40] – [McMaster reference system] mcmastermicroscope:start [2025/08/04 21:23] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +See also: http://microwiki.org
 +
 Since microscopes are a critical instrument this section provides information on both microscope techniques and equipment.  There are already many good sites on microscope techniques so the focus will be more on discussing which ones are relevant for ICs and providing external links to provide more information. Since microscopes are a critical instrument this section provides information on both microscope techniques and equipment.  There are already many good sites on microscope techniques so the focus will be more on discussing which ones are relevant for ICs and providing external links to provide more information.
 +
 +[[:motor:stepper]]
  
 ====== General reccomendations (optical) ======  ====== General reccomendations (optical) ====== 
Line 61: Line 65:
     * Don't have a consistent option here     * Don't have a consistent option here
     * Post mounted (ex: BH2 BHMJ) is easy to use     * Post mounted (ex: BH2 BHMJ) is easy to use
-    * The large frame used on pr0nscope is relatively popular, but I don't know model number+    * The large frame used on prawnscope is relatively popular, but I don't know model number
   * Surplus linear stages   * Surplus linear stages
     * Retrofitted with MDrive17 integrated driver stepper motors     * Retrofitted with MDrive17 integrated driver stepper motors
Line 69: Line 73:
     * Small / low cost: small mount (ex: Newport MM2) upside down     * Small / low cost: small mount (ex: Newport MM2) upside down
   * Machinekit on beagle bone black (BBB) as CNC controller   * Machinekit on beagle bone black (BBB) as CNC controller
-    * Usually with an Adafruit 572: Proto Cape Kit for BeagleBone & Beagle Bone Black+    * Usually with an Adafruit 572 (Proto Cape Kit for BeagleBone & Beagle Bone Black) for connectors and/or level translation
   * Thinkpad T61p controlling the microscope   * Thinkpad T61p controlling the microscope
   * MU800 microscope camera   * MU800 microscope camera
   * Modified v4l Linux driver for the MU800   * Modified v4l Linux driver for the MU800
     * For direct RGB control     * For direct RGB control
-  * pr0ntools (libpano core) for image stitching+  * prawntools (libpano core) for image stitching
  
-[[https://siliconpr0n.org/wiki/doku.php?id=mcmaster|Specific system information here]]+[[https://siliconprawn.org/wiki/doku.php?id=mcmaster|Specific system information here]]
  
  
Line 114: Line 118:
 Follow the [[http://hugin.sourceforge.net/tutorials/scans/en.shtml|Hugin tutorial for stitching scanner images]]. If you have an XY stage, you can take out the rotation parameter since it should be negligible. Follow the [[http://hugin.sourceforge.net/tutorials/scans/en.shtml|Hugin tutorial for stitching scanner images]]. If you have an XY stage, you can take out the rotation parameter since it should be negligible.
  
-====== Field Stop (FS) and Aperature Stop (FS) ======  
- 
-Properly adjusted can give a real improvement in image quality.  Unadjusted (Mit20x objejective): 
- 
-{{:microscope:as_fs_unadj_mit20x.jpg?300|}} 
- 
-Adjusted (Mit20x objejective): 
- 
-{{:microscope:as_fs_adj_mit20x.jpg?300|}} 
- 
- 
-====== DIY non-optical ======  
- 
-  * [[http://sxm4.uni-muenster.de/stm-en/|STM Construction Kit]] 
-  * [[http://www.e-basteln.de/|STM: A project by Jurgen Muller]] 
-  * http://dberard.com/home-built-stm/ 
  
microscope/start.1516819243.txt.gz · Last modified: 2018/01/24 18:40 by mcmaster