Differences

This shows you the differences between two versions of the page.

--- lecroy:6010_magic_controller [2015/05/31 19:04] – mcmaster
+++ lecroy:6010_magic_controller [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-{{::mcmaster:lecroy:6010_magic_controller:front.jpg?100|}}
-Page to collect info on controlling this
-====== GPIB ======
-Primary goal of this project is to learn how to communicate over GPIB.  Some action I do causes it to twitch on my CAMAC bus analyzer but I can't get it to do much else.  I got it to return some data when I messed with the DOWNLOAD menu but not when I actually tried to read a device register.
-====== Composite ======
-{{:mcmaster:lectroy:6010_magic_controller:composite:main.png?300|}}
-More screen captures: https://siliconpr0n.org/uv/lecroy/6010_magic_controller/composite_caps/
-You need to use this to select RS-232 vs GPIB, baud setitngs, etc.  I have yet to get any activity over RS-232 so sticking for GPIB for now.
-====== RS-232 ======
-{{:mcmaster:lectroy:6010_magic_controller:composite:aux_ports2.png?300|}}
-Above: configuration screen
-Supports:
-  * Baud: 75-19200
-  * Data bits: at least 7, 8
-  * Stop bits: at least 1
-  * Parity: odd, even, none
-  * Flow control: at least CTS/RTS off
-When I got it settings were:
-  * 9600 baud
-  * 1 stop bit
-  * even parity
-  * 7 bits
-  * CTS/RTS off
-====== Keyboard ======
-The keyboard (where does this attach?) serial port settings are configured separately than the "RS-232C" settings but are on the same screen
-====== Circuit boards ======
-===== Board 1 =====
-At bottom
-Chips:
-  * TMS9914ANL IC interface bus adapter
-  * HM6116LP-2 (2) 2048 x 8 bit CMOS SRAM
-  * CRT9212 135 character row buffer memory for CRT/printer
-  * AM2716 (2) EPROM
-===== Board 2 =====
-Middle board
-===== Board 3 =====
-Mezzanine board
-Chips:
-  * MC68020R... 68k CPU
-  * MC68881RC16B floating point coprocessor
-  * SCN68681 dual UART
-====== References ======
-MODEL 8901A CAMAC-TO-GPIB INTERFACE: http://cdn.teledynelecroy.com/files/manuals/8901aman.pdf
-  * pg 24: C source code for "Functions to control the CAMAC bus via an 8901A or 6010, from an IBM PC using National Instruments PC-II GPIB Card"
-Some more pictures: http://www.pchemlabs.com/product.asp?pid=949