Differences

This shows you the differences between two versions of the page.

--- gendex:gxs700 [2015/11/25 05:45] – [PCB] mcmaster
+++ gendex:gxs700 [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-TLDR: driver here: https://github.com/JohnDMcMaster/uvscada/tree/master/gxs700
-====== Bare sensors ======
-Some of these were sold at defcon 22.  Look something like this:
-{{:mcmaster:gendex:gxs700:box2.jpg?250|}}
-{{:mcmaster:gendex:gxs700:sensor1.jpg?250|}}
-WARNING WARNING WARNING
-{{:mcmaster:gendex:gxs700:split.jpg?300|}}
-Bond wires are exposed!  Be very very careful handing these!  Seen at upper part of sensor above
-WARNING WARNING WARNING
-JM 2015-11-24: gave away my possibly working bare sensors (3x) and kept 2x definitely broken.  Still have 2x encased units
-====== PCB ======
-{{:mcmaster:gendex:gxs700:pcb_top.jpg?300|}}
-{{:mcmaster:gendex:gxs700:pcb_btm.jpg?300|}}
-===== USB pinout =====
-I didn't pin it out when I had the chance but have a picture:
-FIXME
-===== Flash =====
-"128 Megabit CMOS 3.0 Volt Flash Memory with 104-MHz SPI (Serial Peripheral Interface) Bus"
-  SPANSION
-  FL128PIF
-  12699003 C
-  THAILAND
-  (C) 06
-===== FPGA =====
-Sticker:
--
-Package:
-  Actel
-  ProASIC3
-  A3P250
-  QNG132 1140
-  ZA637115
-===== FX2 USB controller =====
-"CY7C68 Series 16 kb RAM EZ-USB FX2LP USB Microcontroller"
-  CY7C68
-A4S65
-===== MT unknown =====
-WA47
-  PW6B7
-Z9
-  MT
-===== 274 =====
-  .VY
-===== USB connector =====
-pin ribbon cable
-  * 1: +5V
-  * 2: GND
-  * 3: D+
-  * 4: D-
-  * 5: N/C?
-    * Goes to unpopulated capacitor or something
-====== Die ======
-No maker's mark observed on die.  There are some foundry marks but that probably won't be very helpful even if the foundry is identified
-====== CNC machine ======
-DIY XY scanner
-[[mcmaster:x-ray_cnc]]