Differences

This shows you the differences between two versions of the page.

--- alliedhightech:mcmaster [2021/04/23 23:32] – mcmaster
+++ alliedhightech:mcmaster [2025/08/04 21:23] (current) – external edit 127.0.0.1
@@ Line 76: / Line 76: @@
   * Post 1.49"
     * Could I mount stopcock to it somehow?
+  * Feeler gauge test
+    * Pointed inside
+    * About 30 um variation
+    * Good enough for now: not great but not terrible
   * Main crank 40 TPI
     * Wheel is marked in um (635 um)
@@ Line 96: / Line 100: @@
       * Net: 12.65 - 0.840 - 0.277 + 0.116 = 11.649
     * ...but I'm using magnetic sheet. Not the same
-      * Ah I am using 50-150-500, but I put it on a magnetic sheet
+      * 50-500-500 instead of 50-150-500
       * Magnet: 735 um
       * Cloth: 450 um (840 um official)
@@ Line 103: / Line 107: @@
       * Crank: 25.4 / 40 = 0.635 mm
       * 10.914 / 0.635 = 17.2 cranks
+        * Remainder: 0.119 mm
+    * Settings
+      * 225 RPM CCW
+      * Rotation: full speed (8)
+      * Osc: 3
+    * 0.05 um silica
+===== 2021-04-24 =====
+Continue lapping
+same settings