Sample help

386|DOS-Extender 4.1 - Copyright (C) 1986-1993 Phar Lap Software, Inc.

LCA2XNF Version 5.2.1
Copyright (C) 1987-1996 Xilinx Inc. All rights reserved.

LCA2XNF: Translates an input LCA design file into an XNF file with delays.

Usage: LCA2XNF [options] <LCA file name> [<XNF file name>]
  -b = Blocks only. Don't generate gates.
  -d = Suppress default logic generation for RPMs.
  -e = Generate function generators and carry logic as EQNs.
  -f = Generate timing models even if the design is not completely routed.
  -g = Gates only by default. Don't generate blocks.
  -m = Generate gates and blocks.
  -q = Generate XC4000 RPM compatible with non-Unified Library.
  -r = Generate XC4000 RPM compatible with Unified Library.
  -s = Print spec sheets for the part/grade of the routed design.
  -t = Trim unused CLBs and IOBs.
  -u = Generate unit delay model.
  -v = Output file in Version 4 XNF format.
  -w = Suppress warning when overwriting non-LCA2XNF created files.
  XNF file name defaults to LCA name with .xnf extension.
xilinx/xactstep/lca2xnf.txt · Last modified: 2013/01/22 00:42 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki