If your output looks like this check /etc/udev/rules.d/xusbdfwu.rules

dmesg should be your first heads up. No fxload:

[  697.525981] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[  697.618509] usb 1-1.2: New USB device found, idVendor=03fd, idProduct=0013
[  697.618517] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Console:

Release 14.5 - iMPACT P.58f (lin64)
Copyright (c) 1995-2012 Xilinx, Inc.  All rights reserved.
Preference Table
Name                 Setting             
StartupClock         Auto_Correction     
AutoSignature        False               
KeepSVF              False               
ConcurrentMode       False               
UseHighz             False               
ConfigOnFailure      Stop                
UserLevel            Novice              
MessageLevel         Detailed            
svfUseTime           false               
SpiByteSwap          Auto_Correction     
AutoInfer            false               
SvfPlayDisplayComments false               
INFO:iMPACT - Connecting to TCF agent...
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: no JTAG device was found.
AutoDetecting cable. Please wait.
*** WARNING ***: When port is set to auto detect mode, cable speed is set to
default 6 MHz regardless of explicit arguments supplied for setting the baud
rates
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Linux release = 3.11.0-26-generic.
WARNING:iMPACT -  Module windrvr6 is not loaded. Please reinstall the cable
   drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
 Linux release = 3.11.0-26-generic.
WARNING:iMPACT -  Module windrvr6 is not loaded. Please reinstall the cable
   drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport1).
 Linux release = 3.11.0-26-generic.
WARNING:iMPACT -  Module windrvr6 is not loaded. Please reinstall the cable
   drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport2).
 Linux release = 3.11.0-26-generic.
WARNING:iMPACT -  Module windrvr6 is not loaded. Please reinstall the cable
   drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport3).
 Linux release = 3.11.0-26-generic.
WARNING:iMPACT -  Module windrvr6 is not loaded. Please reinstall the cable
   drivers. See Answer Record 22648.
Cable connection failed.
Cable autodetection failed.
 
xilinx/impact_bad.txt · Last modified: 2015/01/27 16:23 by mcmaster-guest
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki