Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
tech:start [2015/05/13 14:47] azonenberg |
tech:start [2016/05/05 23:37] (current) azonenberg |
The intention of this table is to allow easy identification of a | The intention of this table is to allow rough identification of a device's technology node. |
| |
This list includes ITRS standard nodes only, tag devices at the nearest appropriate node. | This list includes ITRS standard nodes only, tag devices at the nearest appropriate node. Please only tag devices whose process geometry is known for certain; this will allow us to more easily compare examples of devices at each node. |
| |
Please only tag devices whose process geometry is known for certain; this will allow us to more easily compare examples of devices at each node. | Devices ≤ 90nm typically have thick top metal with a much larger design rule. There do not appear to be significant scaling trends in top metal pitch below 90nm, |
| |
^Node ^Vcore ^Layer count ^Mz pitch ^M1 pitch ^SRAM pitch ^References | | There are two Vcore columns. The typical numbers are the nominal operating voltages for standard process, the minimum numbers are the lowest voltages allowed for low-power versions of the process. |
|[[:tech:unknown|Unknown]] |N/A |N/A | | | | | | |
|[[:tech:huge|Huge (>10 µm)]] |>= 5 |FIXME | | | | | | Typically devices >180 nm are entirely Al metallization, <130 are Cu except for long-haul power routing. 130-180 can be either. |
|[[:tech:10um|10 µm]] |FIXME |FIXME | | | | | | |
|[[:tech:3um|3 µm]] |FIXME |FIXME | | | | | | ^Node ^Vcore (min) ^Vcore(typ) ^Layer count ^[[:conventions|Mz]] pitch ^[[:conventions|M1]] pitch ^SRAM (8T) ^ SRAM (6T) ^Notes | |
|[[:tech:1500nm|1500 nm]] |FIXME |FIXME | | | | | | |[[:tech:unknown|Unknown]] | |N/A |N/A | | | | | | |
|[[:tech:1000nm|1000 nm]] |3.3 - 5 |2 | | | | | | |[[:tech:huge|Huge (>10 µm)]] | |>= 5 |FIXME | | | | | | |
|[[:tech:800nm|800 nm]] |5 |2 | | | | | | |[[:tech:10um|10 µm]] | |FIXME |FIXME | | | | | | |
|[[:tech:600nm|600 nm]] |5 |2 - 3 | | | | | | |[[:tech:3um|3 µm]] | |FIXME |FIXME | | | | | | |
|[[:tech:350nm|350 nm]] |3.3 - 5 |3 - 5 | | | | | | |[[:tech:1500nm|1500 nm]] | |FIXME |FIXME | | | | | | |
|[[:tech:250nm|250 / 220 nm]] |1.8 - 3.3 |4 - 5 | | | | | | |[[:tech:1000nm|1000 nm]] |2.5 |3.3 - 5.0 |2 | | | | | | |
|[[:tech:180nm|180 / 150 nm]] |1.5 - 1.8 |4 - 6 | | | | | | |[[:tech:800nm|800 nm]] |2.5 |5.0 |2 | | | | | | |
|[[:tech:130nm|130 / 110 nm]] |1.5 - 1.8 |5 - 8 | | | | | | |[[:tech:600nm|600 nm]] | |5.0 |2 - 3 | | | | | | |
|[[:tech:90nm|90 nm]] |1.2 |7 - 10 | | | 1.92 x 2.04 µm = 3.92 µm<sup>2</sup> (8T) \\ 0.82 x 1.28 µm = 1.04 µm<sup>2</sup> (6T) | [[azonenberg:xilinx:xc3s50a|XC3S50A]] block RAM \\ XC3S50A config cells | | |[[:tech:350nm|350 nm]] |2.0 |3.3 - 5 |3 - 5 |1700 nm |1525 nm | |46.17 µm<sup>2</sup> |[[:azonenberg:altera:epm3064a|EPM3064A]], [[:azonenberg:microchip:pic12f683|PIC12F683]] | |
|[[:tech:65nm|65 nm]] |1.0 - 1.2 |9 - 12 | | | | | | |[[:tech:250nm|250 / 220 nm]] | |1.8 - 3.3 |4 - 5 | | | | | | |
|[[:tech:45nm|45 / 40 nm]] |0.9 - 1.2 |6 - 11 | | | | | | |[[:tech:180nm|180 / 150 nm]] | |1.5 - 1.8 |4 - 6 |1000 - 1550 nm |565 nm | |4.15 µm<sup>2</sup> |[[:azonenberg:xilinx:xc2c32a|XC2C32A]], [[:azonenberg:micrel:ksz9021rn|KSZ9021RN]], [[:azonenberg:microchip:pic32mx340f512h|PIC32MX340F512H]] | |
|[[:tech:32nm|32 / 28 nm]] |0.85 - 1.05 |11 - 12 | | | | | | |[[:tech:130nm|130 / 110 nm]] | |1.5 - 1.8 |5 - 8 |3200 nm | | |2.91 µm<sup>2</sup>|[[:azonenberg:cypress:cy8c4245axi|CY8C4245AXI]] | |
|[[:tech:22nm|22 / 20 nm]] |0.9 - 0.95 |9 - 15 | | | | | | |[[:tech:90nm|90 nm]] |1.14 |1.2 |7 - 10 |15000 nm | |3.92 µm<sup>2</sup> | 0.86 - 1.04 µm<sup>2</sup> |[[:azonenberg:xilinx:xc3s50a|XC3S50A]] block RAM (8T), config cells (large 6T) \\ [[http://www.chipworks.com/about-chipworks/overview/blog/review-tsmc-28-nm-process-technology |ChipWorks TSMC 28 nm]] (dense 6T) | |
|[[:tech:14nm|16 / 14 nm]] |0.7 |13 + MiM | |54 nm |0.058 µm<sup>2</sup> (6T) |[[http://www.chipworks.com/en/technical-competitive-analysis/resources/blog/intels-14-nm-parts-are-finally-here/|ChipWorks Intel 14nm]] | | |[[:tech:65nm|65 nm]] |0.95 |1.0 - 1.2 |9 - 12 |14500 - 31500 nm | | | |[[:azonenberg:ti:am1707bzkb3|AM1707]], [[:azonenberg:butterflylabs:bfsc100f144|BFSC100F144]] | |
| |[[:tech:45nm|45 / 40 nm]] |0.95 |0.9 - 1.2 |6 - 11 |7100 nm | |1.38 µm<sup>2</sup> | |[[:azonenberg:xilinx:xc6slx4|XC6SLX4]] | |
| |[[:tech:32nm|32 / 28 nm]] |0.92 |0.85 - 1.05 |11 - 12 | | | | 0.16 µm<sup>2</sup> | [[http://www.chipworks.com/about-chipworks/overview/blog/review-tsmc-28-nm-process-technology|ChipWorks TSMC 28 nm]] | |
| |[[:tech:22nm|22 / 20 nm]] |0.87 |0.9 - 0.95 |9 - 15 | | | | | |
| |[[:tech:14nm|16 / 14 nm]] |0.72 |0.85 |13 + MiM | |54 nm | |0.058 µm<sup>2</sup> |[[http://www.chipworks.com/en/technical-competitive-analysis/resources/blog/intels-14-nm-parts-are-finally-here/|ChipWorks Intel 14nm]] | |
| |
\\ | \\ |
| |