Differences

This shows you the differences between two versions of the page.

--- prog:bp_micro [2013/12/19 08:20] – [BP-2200] mcmaster
+++ prog:bp_micro [2015/04/22 03:27] (current) – removed mcmaster
@@ Line 1: / Line 1: @@
-====== BP series ======
-BP series socket modules:
-^ Name ^ IC ^ # connectors ^ PCB exposed ^ Notes ^
-| SM44P | 44 pin PLCC | ? | Y |  |
-| SM-44P | 44 pin PLCC | ? | N |  |
-| SM-84UP |  | N |  |
-| DIP |  | N |  |
-| SM28TS |  | N |  |
-| SM08S | SOIC-8 |  |  |
-|  |  |  |  |
-ASM48TQ
-SM40TB
-ASM128TQA
-===== BP-1200 =====
-PC interface: parallel port
-Chip interface: 2 plug SM
-===== BP-1400 =====
-PC interface: parallel port
-Chip interface: 3 plug SM
-===== BP-1600 =====
-PC interface: parallel port
-Chip interface: 3 plug SM
-===== BP-2200 =====
-"Concurrent Programming System"
-PC interface: parallel port
-Chip interface: 4X 3 plug SM
-====== EP series ======
-===== EP-1 =====
-PC interface: parallel port
-Chip interface: DIP
-===== EP-1132 =====
-PC interface: parallel port
-Chip interface: DIP-
-===== EP-1140 =====
-PC interface: parallel port
-Chip interface: DIP-40
-====== PLD series ======
-===== PLD-1128 =====
-PC interface: parallel port
-Chip interface: DIP-28
-====== CP series ======
-===== CP-1128 =====
-PC interface: parallel port
-Chip interface: DIP-28
-====== Silicon Sculptor ======
-Actel programmers made by BPM.
-As these cost less than the "real" BPM programmers, presumably can't be used with normal BPM software and/or work with other adapters
-===== Silicon Sculptor 1 =====
-Has 2 headers (left/right) that adaptors plug into
-Interface: parallel port
-There is version with 1 connector and a version with 6 connectors
-X markings
-  Silicon Sculptor
-  FAIL
-  ACTIVE
-  PASS
-  START
-  ACTEL DEVICE PROGRAMMER
-  BP MICROSYSTEMS
-===== Silicon Sculptor 2 =====
-Briefly looking couldn't find a picture without an adaptor attached...not sure if it has two or three adaptor connectors
-Markings:
-  Silicon Sculptor II
-  Actel
-  FAIL
-  ACTIVE
-  PASS
-  ACTEL DEVICE PROGRAMMER
-  BP MICROSYSTEMS
-===== Silicon Sculptor 3 =====
-Product page: http://www.microsemi.com/products/fpga-soc/design-resources/programming/silicon-sculptor-3
-I love how they switched from roman numerals to Arabic numbers.  Maybe they'll call the next one Silicon Sculptor D...
-Has 3 headers (left/right/top) that adaptors plug into
-Interface: USB
-Markings:
-  Silicon Sculptor 3
-  Actel
-  FAIL
-  ACTIVE
-  PASS
-  START (button)
-  ACTEL DEVICE PROGRAMMER
-  BP MICROSYSTEMS