Differences

This shows you the differences between two versions of the page.

--- philpem:gec-plessey:arm250 [2024/07/01 17:27] – add details philpem
+++ philpem:gec-plessey:arm250 [2025/08/04 21:24] (current) – external edit 127.0.0.1
@@ Line 34: / Line 34: @@
 The die is quite large, around 10mm square, and must have been very expensive to produce.
+Mastodon thread with some photos of the process: https://digipres.club/@philpem/112620630504333892
@@ Line 41: / Line 43: @@
 </code>
-{{https://siliconpr0n.org/map/gec-plessey/arm250/single/gec-plessey_arm250_philpem_mz_ms10x.thumb.jpg}}
+{{https://siliconprawn.org/map/gec-plessey/arm250/single/gec-plessey_arm250_philpem_mz_ms10x.thumb.jpg}}
-[[https://siliconpr0n.org/map/gec-plessey/arm250/philpem_mz_ms10x/|mz_ms10x]]
+[[https://siliconprawn.org/map/gec-plessey/arm250/philpem_mz_ms10x/|mz_ms10x]]
-  * [[https://siliconpr0n.org/map/gec-plessey/arm250/single/gec-plessey_arm250_philpem_mz_ms10x.jpg|Single]] (21413x19734, 146.801MiB)
+  * [[https://siliconprawn.org/map/gec-plessey/arm250/single/gec-plessey_arm250_philpem_mz_ms10x.jpg|Single]] (21413x19734, 146.801MiB)
     * Olympus BH2 Metallurgical, MSPlan 10x
     * Image has been colour-corrected with GIMP to try and remove the orange tint of the extremely thick polyimide passivation topcoat.