Differences

This shows you the differences between two versions of the page.

--- robertbaruch [2017/11/28 19:27]
mcmaster removed
+++ — (current)
@@ Line 1: / Line 1: @@
-{{tag>collection}}
-All text and images licensed as [[https://creativecommons.org/licenses/by-sa/4.0/|CC-BY-SA]] unless otherwise stated.
-====== Contacts ======
-  * [[https://www.halfbakedmaker.org|Website: The Half-Baked Maker]]
-  * robert.c.baruch@gmail.com
-  * @babbageboole
-====== Equipment ======
-{{robertbaruch:microscope.jpg?300}}
-  * [[http://www.alanwood.net/downloads/olympus-bhmj-bhmj-n-instructions.pdf|Olympus BHMJ]] metallurgical microscope
-  * Mitutoyo M Plan Apo 20x objective
-  * [[https://en.wikipedia.org/wiki/Canon_EOS_600D|Canon EOS 600D]] (Rebel T3i) DSLR camera (18 MP, [[https://en.wikipedia.org/wiki/APS-C|APS-C]] 22.3 × 14.9 mm sensor)
-  * AmScope CA-CAN-SLR Canon DSLR adapter for microscopes (2x magnification)
-  * [[http://micromt.com/product_view_ori.html?option1=AM2&idx=299&board_id=mmt_product&p=M|MMT AM2-0803-3S]] 80x80mm motorized XY stage (2um/step) with [[https://www.orientalmotor-shop.jp/shop/product_details_ec/?hinmei=PK545NBW|Oriental Motor PK-545-NBW]] 5-phase stepper motors (0.72 degrees/step) and [[http://www.techniscribe.com/cfk.pdf|Vexta DFC1507]] drivers
-  * Newport NRC 485 prism mount (tip-tilt-rotate), similar to [[https://www.newport.com/p/PO46N-50|Newport PO46N-50]].
-With a calibration slide, looking at the 0.01mm line target, I measured 423 +/- 3 pixels over 5 lines, yielding 84.5 +/- 1 nm per pixel.
-====== The 54/74 Project ======
-This project seeks to document 54xx/74xx-series logic chips and subfamilies by imaging their dies and tracing out their schematics. The project started on March 4, 2017.
-See the project at https://project5474.org.
-==== Collection ====
-{{topic>collection_robertbaruch}}

--- sidebar [2024/04/22 04:35]
azonenberg
+++ sidebar [2024/04/22 04:36] (current)
azonenberg old revision restored (2022/05/21 00:28)
@@ Line 1: / Line 1: @@
-{{tag>collection_az year_unknown vendor_microchip vendor_micrel type_interface type_interface/serdes type_interface/serdes/ethernet type_network type_network/ethernet foundry_tsmc tech_65nm}}
+[[:start|Top level]]
-Tech node info comes from IBIS file "[Source]      Made by TSMC 65nm IBIS model file"
+Lists of devices
-http://ww1.microchip.com/downloads/en/DeviceDoc/ksz9031%20IBIS.zip
-TODO: actually decap one :){{https://siliconpr0n.org/map/micrel/ksz9031rnx/single/micrel_ksz9031rnx_azonenberg_mz_mit20x.thumb.jpg}}
+    *  [[:collection|Collection]]
+      * See for copyright info
+    * [[:foundry:start|Foundry]]
+    * [[:tech:start|Process technology]]
+    * [[:type|Type]]
+    * [[:vendor:start|Vendor]]
+    * [[:year|Year]]
-[[https://siliconpr0n.org/map/micrel/ksz9031rnx/azonenberg_mz_mit20x/|mz_mit20x]]
+For newcomers
-  * [[https://siliconpr0n.org/map/micrel/ksz9031rnx/single/micrel_ksz9031rnx_azonenberg_mz_mit20x.jpg|Single]] (12317x8766, 24.8946MiB)
+    * [[:navigation|Navigating the site]]
+    * [[:your_first_page|Writing your first page]]
+Other
+    * [[:conventions|Conventions]] for naming etc
+    * [[:digitized|List of digitized chips]]
+    * [[:Counterfeit]]
+    * [[:true_mask_art|True mask art]]
+    * [[:Package|Package]]
+    * [[:stdcell|Cell libaries]]
+    * [[:hdl|HDL]]
+    * [[:prog:start|Programming]]
+    * [[:TODO|TODO]]
+    * [[:Links]]